Products Description
|
MODEL
|
WS56-136
|
|
Brand
|
WS-WAHSON
|
|
Product Name
|
Ceiling Fan
|
|
Assembled Size (W x H)
|
1440*500mm
|
|
Color
|
SATIN NICKEL
|
|
Fan Blades Number
|
5 Blades
|
|
Blade Material
|
Plywood
|
|
For Room
|
15–25 ㎡
|
|
Motor Type
|
AC Type
|
|
Control Mode
|
Remote
|
|
Fan Blades Material
|
ABS
|
|
Products Highlights
|
●Classical Model
●HIGH AIR-FLOW Enjoy the cool breeze created by a ceiling fan! Three speeds allow for the perfect setting for your space.
●QUIET, REVERSIBLE, DC MOTOR
Conveniently quiet,
●PERFECT For ROOM SIZE
Perfect for living rooms, bedrooms,dining rooms or family rooms
|
Packing&Transport
FAQ
1.Motor can’t move
1)Check the wires (insulating layer of the wire maybe caught by the terminal ),
check whether all the inner wires and terminals are loose.
2)Input voltage maybe lower than the rate voltage, the rate data is 220V-50Hz,
please turn off the power before checking.
3) Make sure the plastic kit into the motor must be pick out ( the kit is to stop the
motor moving or rotating during the transportation)
2.Noise
1)All the screw must be tightened.
2)Check if the fan crash some obstacles when it’s moving.
3)Make sure the screw between hanging bracket and ceiling is tight,
shockproof must be installed on it.
3.Light doesn’t work
1) check the light switch.
2) check if the light’s wires and terminals are loose.
3) check if the bulb or LED source is work
4) check the remote control can work or not
4.Fan shaking
1) hemisphere of the rod must be tight, the groove of the hemisphere
on the top of the rod must be embed into the bulge of the hanging bracket.
2) Two screws in the coupler must be tight.
3) Check if all the screws of the blades and blade holders are tight.
4) Follow the step in the manual to adjust the fan.
1)Check the wires (insulating layer of the wire maybe caught by the terminal ),
check whether all the inner wires and terminals are loose.
2)Input voltage maybe lower than the rate voltage, the rate data is 220V-50Hz,
please turn off the power before checking.
3) Make sure the plastic kit into the motor must be pick out ( the kit is to stop the
motor moving or rotating during the transportation)
2.Noise
1)All the screw must be tightened.
2)Check if the fan crash some obstacles when it’s moving.
3)Make sure the screw between hanging bracket and ceiling is tight,
shockproof must be installed on it.
3.Light doesn’t work
1) check the light switch.
2) check if the light’s wires and terminals are loose.
3) check if the bulb or LED source is work
4) check the remote control can work or not
4.Fan shaking
1) hemisphere of the rod must be tight, the groove of the hemisphere
on the top of the rod must be embed into the bulge of the hanging bracket.
2) Two screws in the coupler must be tight.
3) Check if all the screws of the blades and blade holders are tight.
4) Follow the step in the manual to adjust the fan.
Reviews
There are no reviews yet.